代码如下添加参数，只要是使用的是同款屏幕，那就可以直接使用里面所有参数，在相关的DTS文件进行修改

	lvds_panel: lvds-panel {
		status = "okay";
		compatible = "simple-panel";
		backlight = <&backlight1>;
		reset-delay-ms = <20>;
		enable-delay-ms = <20>;
		prepare-delay-ms = <20>;
		unprepare-delay-ms = <20>;
		disable-delay-ms = <20>;
		bus-format = <MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA>;

		pinctrl-names = "default";
		pinctrl-0 = <&lvds_panel_enable>;
		enable-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;

		width-mm = <210>;
		height-mm = <157>;

		lvds_disp_timings0: display-timings {
			native-mode = <&lvds_timing0>;
			lvds_timing0: lvds-timing0 {
				clock-frequency = <51200000>;
				hactive = <1024>;
				vactive = <600>;
				hback-porch = <160>;
				hfront-porch